الرئيسية › دليل الباحثين › Chokri Khaldi
Chokri Khaldi
الانتماء : Tunis University · National Engineering School of Tunis · ENSIT
- 52منشورات (انتماء تونسي)
- 69مجموع المنشورات
- 1209الاستشهادات
- 23مؤشر h
هل هذا أنت؟ عرّف بأبحاثك
أنشئ ملفك على DzCademia مجانًا وأضف مقالاتك: ستظهر بسهولة أكبر على Google وفي مساعدي الذكاء الاصطناعي مثل ChatGPT، فيقرؤها ويستشهد بها عدد أكبر من الناس.
إنشاء ملفي المجاني إضافة منشوراتيمجالات البحث
- Hydrogen Storage and Materials
- Electrocatalysts for Energy Conversion
- Hydrogen embrittlement and corrosion behaviors in metals
- Advancements in Battery Materials
- Advanced Battery Technologies Research
المنشورات (52)
- Activation, aging and state of charge dependence of interfacial and kinetic parameters in LaY 2 Ni 9 negative electrode: An electrochemical impedance spectroscopy investigation
- Impact of cerium substitution on the structure and electrochemical performance of La1-yCeyFe0.8Ni0.2O3 (y = 0, 0.5) perovskites for Ni-MH battery electrodes
- Structural and Electrochemical Properties of CuFe2O4 Spinel Ferrite Synthesized Via a Sol-Gel Method for Ni-MH Battery Applications
- Structure and Electrochemical Behavior of ZnLaFeO4 Alloy as a Negative Electrode in Ni-MH Batteries
- Study of the LaNi3.55Mn0.4Al0.3Co0.75 hydrogen storage anode /KOH interface by electrochemical impedance spectroscopy (EIS) during a galvanostatic cycling
- Electrochemical impedance spectroscopy of AB3 active electrode in nickel metal hydride accumulators: The effect of temperatures and immersion times
- Electrochemical study of the LaNiO3 perovskite-type oxide used as anode in nickel-metal hydride batteries
- Effect of Milling Time on Electrochemical Properties of CaNi4.8Mg0.2 Anode Material of Ni-MH Battery
- Electrochemical properties of the CaNi 4 . 8 M 0.2 (MMg, Zn, and Mn) mechanical milling alloys used as anode materials in nickel‐metal hydride batteries
- Determination of H2O/H2 system exchange current densities on cycled hydride electrodes from overswitch potential jump at low and high charge/discharge rates
- Electrochemical study of the LaFe0.8Ni0.2O3 perovskite-type oxide used as anode in nickel-metal hydride batteries
- Electrochemical study of LaGaO 3 as novel electrode material of hydrogen battery (Ni/ MH )
- Galvanostatic and EIS studies of the LaNi3.55Mn0.4Al0.3Co0.75 metal hydride anode during cycling
- Kinetic hydrogenation of the electrode-electrolyte interface for LaY2Ni9 Nickel Metal Hydride accumulators
- Structural, morphological, and electrochemical properties of AB 5 hydrogen storage alloy by mechanical alloying
- Phase structure and electrochemical characteristics of CaNi4.7Mn0.3 hydrogen storage alloy by mechanical alloying
- Electrochemical Studies on the Ca‑Based Hydrogen Storage Alloy for Different Milling Times
- Electrochemical properties of the CaNi 5− x Mn x electrodes synthesized by mechanical alloying
- Rietveld refinement of X-ray diffraction, impedance spectroscopy and dielectric relaxation of Li-doped ZnO-sprayed thin films
- Electrochemical Studies on the Ca-Based Hydrogen Storage Alloy for Different Milling Times
- Structure and electrochemical hydrogen storage properties of Ti-Fe-Mn alloys for Ni-MH accumulator applications
- Effects of lithium doping on: microstructure, morphology, nanomechanical properties and corrosion behaviour of ZnO thin films grown by spray pyrolysis technique
- Effect of temperature on behavior of perovskite-type oxide LaGaO3 used as a novel anode material for Ni-MH secondary batteries
- Nanoindentation and AFM characterization of lithium-doped ZnO sprayed thin films
- Kinetics and corrosion properties of the LaY2Ni9 alloy used as anode for nickel-metal hydride batteries
- EIS study of MH negative electrode/electrolyte interface during cycling
- Structural, morphological, optical and photodetector properties of sprayed Li-doped ZnO thin films
- Structural and electrochemical properties of TiFe alloys synthesized by ball milling for hydrogen storage
- Influence of electrolyte concentration on the electrochemical characteristics of LaGaO3 perovskite oxide as novel anode material for Ni/MH batteries
- Doped zinc oxide thin films for photodetectors devices
- The effect of ZnO addition on the electrochemical properties of the LaNi3.55Mn0.4Al0.3Co0.2Fe0.55 electrode used in nickel–metal hydride batteries
- The electrochemical performance of AB3-type hydrogen storage alloy as anode material for the nickel metal hydride accumulators
- Electrochemical properties of Ti2Ni hydrogen storage alloy
- Study of electrochemical performances of perovskite-type oxide LaGaO3 for application as a novel anode material for Ni-MH secondary batteries
- Thermodynamic and kinetic parameters and high rate discharge-ability of the AB5-type metal hydride anode
- Doped zinc oxide thin films for photodetectors devices
- AC Impedance Behavior of LaNi3.55Mn0.4Al0.3Co0.6Fe0.15 Hydrogen-Storage Alloy: Effect of Surface Area
- Preparation and characterization of zinc sulfide thin films through the sulfuration of sprayed zinc oxide thin films
- Electrochemical properties of the LaGaO3 perovskite-type oxide used as negative electrode in Ni/MH accumulators
- Effect of the charge/discharge current densities on the ectrochemical hydrogen storage performances of CeY2Ni9 alloy
- Effect of the discharge rate on the electrochemical properties of LaY2Ni9 hydrogen storage alloy
- Structure, volumetric adsorption method and electrochemical hydrogen storage properties of vanadium oxide nanotubes VOx-NTs
- Electrochemical Study of the Cobalt-Containing and Non-Cobalt-Containing AB5 Alloys Used as Negative Electrodes in Nickel–Metal Hydride Batteries
- Electrochemical hydrogenation of LaY2Ni9 anode at C/3 and C/10 discharge rates for nickel-metal hydride batteries
- Nanotube of vanadium oxide used as a negative electrode in Ni-MH accumulator
- Electrochemical properties of LaY2Ni9 hydrogen storage alloy, used as an anode in nickel-metal hydride batteries
- Structure and electrochemical hydrogen storage properties of Ti 2 Ni alloy synthesized by ball milling
- Electrochemical hydrogen storage properties of Ti2Ni alloy prepared by mechanical alloying
- Electrochemical properties of the LaY2Ni9 hydrogen storage alloy
- Kinetic and thermodynamic studies of hydrogen storage alloys as negative electrode materials for Ni/MH batteries: a review
- The effect of the temperature on the electrochemical properties of the hydrogen storage alloy for nickel–metal hydride accumulators
- Corrosion effect on the electrochemical properties of LaNi3.55Mn0.4Al0.3Co0.75 and LaNi3.55Mn0.4Al0.3Fe0.75 negative electrodes used in Ni–MH batteries
المؤلفون المشاركون
- Jilani Lamloumi
- Yassine Ben Belgacem
- Youssef Dabaki
- Mohamed Tliha
- Samir Azizi
- Mohamed G. Salah
- Wissem Zayani
- S. Boussami
- Abdelwaheb Boukhachem
- Abbes Kaabi
- Hamadi Mathlouthi
- Bilel Hosni
البيانات البيبليوغرافية مصدرها OpenAlex (قاعدة مفتوحة).
لماذا تختارون Dzcademia؟
ملفات أكاديمية ومقالات ومداخلات علمية: امنحوا أبحاثكم حضوراً عاماً منظماً. تساعد البيانات الوصفية المدمجة محركات البحث ومساعدات الذكاء الاصطناعي على التعرف على أعمالكم وفهم مراجعها.
علّق عبر Google
سجّل الدخول عبر Google للتعليق مباشرة على هذه الصفحة.