الرئيسية › دليل الباحثين › Tarik Chafik
Tarik Chafik
الانتماء : Abdelmalek Essaâdi University
- 85منشورات (انتماء مغربي)
- 116مجموع المنشورات
- 3413الاستشهادات
- 32مؤشر h
الملف البحثي
لدى Tarik Chafik 85 منشور(ات) مفهرسة (1998–2026). تُنشر أعماله أساسًا في «International Renewable and Sustainable Energy Conference (IRSEC)»، «Journal of Hazardous Materials» و«Chemical Product and Process Modeling». أكثر مقالاته استشهادًا هو «Synthesis of hard carbon from argan shells for Na-ion batteries» (2017)، وقد استُشهد به 347 مرة. 18 من هذه المنشورات تعود إلى آخر ثلاث سنوات من النشاط. شارك في تأليف أعماله 12 باحثًا على الأقل، منهم باحثون من مؤسسات في فرنسا، إسبانيا، البرتغال، إيطاليا.
هل هذا أنت؟ عرّف بأبحاثك
أنشئ ملفك على DzCademia مجانًا وأضف مقالاتك: ستظهر بسهولة أكبر على Google وفي مساعدي الذكاء الاصطناعي مثل ChatGPT، فيقرؤها ويستشهد بها عدد أكبر من الناس.
إنشاء ملفي المجاني إضافة منشوراتيمجالات البحث
- Catalytic Processes in Materials Science
- Catalysts for Methane Reforming
- Industrial Gas Emission Control
- Adsorption and biosorption for pollutant removal
- Supercapacitor Materials and Fabrication
المنشورات (85)
- ARGAN SHELL - DERIVED CARBON MATERIAL AS AN EFFICIENT SORBENT FOR TOXIC METAL REMOVAL FROM WATER SAMPLES
- Structural and electrical properties of low-cost La0.6Sr0.4Co0.2Fe0.8O3−δ–waste hematite composite towards integration in electrolyte-layer free fuel cell
- Lead Contamination in Moroccan Spices Determined by Graphite Furnace Atomic Absorption Spectrometry (GFAAS): Exposure and Environmental Health Risk Assessment
- Towards Sustainable Scaling-Up of Nanomaterials Fabrication: Current Situation, Challenges, and Future Perspectives
- Chitosan-Bentonite composite adsorption of herbicide glyphosate from water solution
- Innovative transition from traditional pyrolysis to catalytic pyrolysis for bioenergy: Optimizing bio-oil production from renewable biomass
- Efficient enrichment and selective recovery of rare earth elements from igneous carbonatite ore
- Stability and thermophysical properties of PAO-Based nanofluids with MWCNTs, nano-MoS2 and their hybrid formulations for thermal applications
- Stability and Thermophysical Property Enhancement of MoS2-Based Water Nanofluids Using Cationic CTAB and Anionic SLS Surfactants
- Techno-economic assessment of medical oxygen production: cryogenic vs. PSA technologies
- Assessment of CO 2 methanation integration in a power to gas system
- Valorization of agricultural olive waste as an activated carbon adsorbent for the remediation of water sources contaminated with pharmaceuticals
- Advanced electrolyte materials based on natural minerals for low- temperature solid oxide fuel cells applications
- Valence-controlled manganese oxide by solvent-assisted permanganate reduction for advanced aqueous zinc-ion batteries
- Tuning the morphology of argan shells-based activated carbon towards applications as an anode for lithium-ion battery
- Towards a low-cost solid oxide electrolyte based on local mineral
- Thermal treatment and inhibition study with non-toxic product of polyphenol oxidase from Mediterranean Palm heart (Chamaerops humilis L.)
- Author correction to “Enhanced property of thin cuprous oxide film prepared through green synthetic route”
- Unraveling high-performance oxygen-deficient amorphous manganese oxide as the cathode for advanced zinc ion batteries
- Engineering g-C3N4 with CuAl-layered double hydroxide in 2D/2D heterostructures for visible-light water splitting
- Hydrothermal carbonization vs. anaerobic digestion to valorize fruit and vegetable waste: A comparative technical and energy assessment
- Building towards Supercapacitors with Safer Electrolytes and Carbon Electrodes from Natural Resources
- Integration of large-scale pressure swing adsorption units in local hospitals in Morocco: Design, simulation and performance evaluation
- Small-scale medical oxygen production unit using PSA technology: modeling and sensitivity analysis
- Towards a Low-Cost Solid Oxide Electrolyte Based on Local Mineral
- Graphitic carbon nitride/few-layer graphene heterostructures for enhanced visible-LED photocatalytic hydrogen generation
- Chemical Production of Graphene Oxide with High Surface Energy for Supercapacitor Applications
- Life cycle assessment of large-scale production of MoS2 nanomaterials through the solvothermal method
- Nanometric MnO2 and MnO2‐Graphene Oxide Materials Enabled by a Solvent‐Assisted Synthesis and Their Application in Asymmetric Supercapacitors
- Process design and economic assessment of large-scale production of molybdenum disulfide nanomaterials
- Impact of Solar Energy Integration on the Rheological and Chemical Properties of Bitumen
- Layered double hydroxide (LDH)-based materials: A mini-review on strategies to improve the performance for photocatalytic water splitting
- Enhanced tribological properties of wind turbine engine oil formulated with flower-shaped MoS2 nano-additives
- Circumneutral concentrated ammonium acetate solution as water-in-salt electrolyte
- Methodology for Efficient Bitumen Storage with Reduced Energy Consumption
- Efficient CO2 Capture by Ultra‐high Microporous Activated Carbon Made from Natural Coal
- Towards harnessing local natural clay in power to X technologies: Review on syngas production using low cost catalyst extruded as honeycomb monolith
- Subcritical hydrothermal synthesis of amorphous molybdenum disulfide spheres
- Activated carbon with exceptionally high surface area and tailored nanoporosity obtained from natural anthracite and its use in supercapacitors
- A high energy storage supercapacitor based on nanoporous activated carbon electrode made from Argan shells with excellent ion transport in aqueous and non-aqueous electrolytes
- Improved tribological properties, thermal and colloidal stability of poly-α-olefins based lubricants with hydrophobic MoS2 submicron additives
- Effect of morphology and hydrophobization of MoS2 microparticles on the stability of poly-α-olefins lubricants
- Simulation and Sensitivity Analysis of Molybdenum Disulfide Nanoparticle Production Using Aspen Plus
- Enhanced property of thin cuprous oxide film prepared through green synthetic route
- Optimization of the Capacitance of Activated Carbon in Symmetric Capacitive Deionization System
- CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
- Synthesis of hard carbon from argan shells for Na-ion batteries
- Decontamination of water polluted with pesticide using biopolymers: Adsorption of glyphosate by chitin and chitosan
- Autothermal reforming of model purified biogas using an extruded honeycomb monolith: A new catalyst based on nickel incorporated illite clay promoted with MgO
- Simulation of The Synthesis Route of MoS2 at Laboratory Scale: Comparison Between Simulated and Experimental Results
- Study of the Wind Effect on the Quality and Lubrication System of Wind Turbines
- Synthesis of MoS2 Nanoparticles and Improvement of Their Dispersibility and Stability in PAO Base Oils
- Enhanced Dispersibility of MoS2 Nanoparticles in Poly-α-Olephines Lubricant Through Surface Modification
- Development of nickel supported La and Ce-natural illite clay for autothermal dry reforming of methane: Toward a better resistance to deactivation
- Novel nickel promoted illite clay based catalyst for autothermal dry reforming of methane
- Effect of surfactant concentration on the morphology of Mo x S y nanoparticles prepared by a solvothermal route
- Autothermal dry reforming of methane using nickel promoted illite clay catalyst
- Innovative CVD synthesis of Cu2O catalysts for CO oxidation
- Intrinsic catalytic properties of extruded clay honeycomb monolith toward complete oxidation of air pollutants
- Removal of methylene blue onto mineral matrices
- Non-Calorimetric Determination of the Adsorption Heat of Volatile Organic Compounds under Dynamic Conditions
- Facile solvothermal synthesis of bimetallic CoMoS 2 and NiMoS 2 nanospheres
- Catalytic complete oxidation of acetylene and propene over clay versus cordierite honeycomb monoliths without and with chemical vapor deposited cobalt oxide
- Effect of electrolytes nature and concentration on the morphology and structure of MoS2 nanomaterials prepared using one-pot solvothermal method
- Comparison of synthesis routes of inorganic fullerene-like nano-additives for wind turbine lubrication: Application of Life Cycle Assessment approach
- Study of electrochemical alkali insertion into carbonaceous materials
- Evaluation of the potential of volatile organic compound (di-methyl benzene) removal using adsorption on natural minerals compared to commercial oxides
- Towards biofuel combustion with an easily extruded clay as a natural catalyst
- Corrigendum to: Towards biofuel combustion with an easily extruded clay as a natural catalyst [Appl. Energy 107 (2013) 149–156]
- Determination of the heat effects involved during toluene vapor adsorption and desorption from microporous activated carbon
- Determination of Adsorption Characteristics of Volatile Organic Compounds Using Gas Phase FTIR Spectroscopy Flow Analysis
- Easy extrusion of honeycomb-shaped monoliths using Moroccan natural clays and investigation of their dynamic adsorptive behavior towards VOCs
- Evaluation of the Soil Contamination of Tangier (Morocco) by the Determination of BTEX, PCBs, and PAHs
- Use of semipermeable membrane devices for assessment of air quality in Tangier (Morocco)
- Original carbon-based honeycomb monoliths as support of Cu or Mn catalysts for low-temperature SCR of NO: Effects of preparation variables
- A comparative study of the adsorption and desorption of o-xylene onto bentonite clay and alumina
- Adsorption models and heat of adsorption of adsorbed ortho di-methyl benzene species on silica by using Temperature Programmed Adsorption Equilibrium methods
- Determination of the Heat of Adsorption and Desorption of a Volatile Organic Compound Under Dynamic Conditions Using Fourier‐Transform Infrared Spectroscopy
- Originally prepared carbon-based honeycomb monoliths with potential application as VOCs adsorbents
- Physicochemical characterization and adsorptive properties of some Moroccan clay minerals extruded as lab-scale monoliths
- FTIR determination of adsorption characteristics for volatile organic compounds removal on diatomite mineral compared to commercial silica
- DEEP CATALYTIC OXIDATION OF BENZENE IN THE PRESENCE OF SEVERAL VOLATILE ORGANIC COMPOUNDS ON METAL OXIDES AND Pt/Al2O3 CATALYSTS
- Reactivity of surface species in the reduction of NOx by ethanol on Ag/Al2O3
- In situ diffuse reflectance infrared Fourier transform spectroscopy study of surface species involved in NOx reduction by ethanol over alumina-supported silver catalyst
- Investigation of NO interaction on Rh/doped TiO2-based automotive catalyst using combined transient diffuse reflectance Fourier transform infrared and mass spectrometry
مجلات النشر
- International Renewable and Sustainable Energy Conference (IRSEC) × 7
- Journal of Hazardous Materials × 4
- Chemical Product and Process Modeling × 3
- Comptes Rendus Chimie × 3
- Fuel × 2
- Journal of Energy Storage × 2
المنشورات حسب السنة
- 20263
- 20258
- 20247
- 20237
- 20226
- 20214
- 20203
- 20197
- 20181
- 20177
التعاون العلمي
المؤسسات الشريكة : Université Mohammed VI Polytechnique · Université de Tours · Physico-Chimie des Matériaux et des Électrolytes pour l’Énergie · Universidade do Porto · International University of Rabat
بلدان المؤلفين المشاركين : فرنسا · إسبانيا · البرتغال · إيطاليا
المؤلفون المشاركون
- Ouafae Achak
- Hanane Akram
- Achraf El Kasmi
- Sanae Harti
- Chaouki El Moujahid
- Hicham Zaitan
- Fouad Ghamouss
- Mohamed Zoubair Saidi
- Oumaima Ettalibi
- Mouad Hachhach
- Mehdi Karbak
- Mounir Hanafi
البيانات البيبليوغرافية مصدرها OpenAlex (قاعدة مفتوحة).
لماذا تختارون DzCademia؟
ملفات أكاديمية ومقالات ومداخلات علمية: امنحوا أبحاثكم حضوراً عاماً منظماً. تساعد البيانات الوصفية المدمجة محركات البحث ومساعدات الذكاء الاصطناعي على التعرف على أعمالكم وفهم مراجعها.
علّق عبر Google
سجّل الدخول عبر Google للتعليق مباشرة على هذه الصفحة.