الرئيسية › دليل الباحثين › Abdelhakim Settar
Abdelhakim Settar
الانتماء : Université d'Orléans · Laboratoire Pluridisciplinaire de Recherche en Ingénierie des Systèmes, Mécanique et Energétique · Institut National des Sciences Appliquées Centre Val de Loire
- 35منشورات (انتماء فرنسي)
- 71مجموع المنشورات
- 549الاستشهادات
- 14مؤشر h
الملف البحثي
لدى Abdelhakim Settar 35 منشور(ات) مفهرسة (2014–2026). تُنشر أعماله أساسًا في «International Journal of Hydrogen Energy»، «Applied Physics A» و«Experimental Techniques». أكثر مقالاته استشهادًا هو «Friction stir welding process improvement through coupling an optimization procedure and three-dimensional transient heat transfer numerical» (2018)، وقد استُشهد به 43 مرة. 16 من هذه المنشورات تعود إلى آخر ثلاث سنوات من النشاط. شارك في تأليف أعماله 12 باحثًا على الأقل، منهم باحثون من مؤسسات في الجزائر، إندونيسيا، المغرب، تونس.
هل هذا أنت؟ عرّف بأبحاثك
أنشئ ملفك على DzCademia مجانًا وأضف مقالاتك: ستظهر بسهولة أكبر على Google وفي مساعدي الذكاء الاصطناعي مثل ChatGPT، فيقرؤها ويستشهد بها عدد أكبر من الناس.
إنشاء ملفي المجاني إضافة منشوراتيمجالات البحث
- Heat and Mass Transfer in Porous Media
- Catalysts for Methane Reforming
- Heat Transfer and Optimization
- Chemical Looping and Thermochemical Processes
- Natural Fiber Reinforced Composites
المنشورات (35)
- Hydrogen Production from Blended Waste Biomass: Pyrolysis, Thermodynamic-Kinetic Analysis and AI-Based Modelling
- Hybrid Oxygen Enrichment and Preheating Strategy for Performance Recovery in Ultra‐Lean Micro–Trapped Vortex Combustors
- Correction: Effect of multiwall carbon nanotube (MWCNT) content on thermal and structural properties enhancement of FeCu–MWCNT nanocomposites synthesized by high-energy ball milling
- Hydrogen absorption / desorption behavior in compacted LaNi3·6Mn0·3Al0·4Co0.7 powder
- A Novel Micro‐Thermophotovoltaic Combustor of Hydrogen–Air to Enable Ultra‐Lean Combustion, High Thermal Output and NO Low Emissions
- Magnetohydrodynamic (MHD) effects on heat transfer and melting in a large-scale cavity with fins containing gallium considering buoyancy and Lorentz forces
- A study on the experimental and theoretical aspects of hydrogen absorption by the LmNi4.91Sn0.15 alloy
- Al- and Co-doped MgO for hydrogen storage
- Development and characterization of clay bio-composites for enhanced thermal performance: a sustainable approach utilizing Posidonia oceanica leaves
- Objective Optimization of a Novel Micro Trapped Vortex Combustor for Thermophotovoltaic Systems Using CFD and RSM
- Experimental investigation of the hydrogen storage capacity in LaNi3.6Al0.4Mn0.3Co0.7 alloy
- Enhancing Friction Stir Welding Performance for 2017AA Alloy through Cooling with Mediterranean Seawater
- Experimental investigation of conductive heat transfer and fire protection in a polymer-based plate heat exchanger
- Thermal characterization of plat heat exchanger made from polymer biocomposite reinforced by silicon carbide
- Experimental and numerical study of temperature evolution and hydrogen desorption process on an amorphous alloy Mg50Ni50
- Correction: Enhancing Friction Stir Welding Performance for 2017AA Alloy Through Cooling with Mediterranean Seawater
- Thermo-physical and mechanical performances of a new lightweight construction material made with clay and Posidonia-Oceanica fibers
- Sonochemical synthesis and characterization of new nanostructured ternary composites based on Mg, Zn, and Co
- Hybrid multi-response optimization and analysis of UFSW process using entropy measurement: effect of tool deviation on mechanical properties of an optimum joint
- Intumescent fire‐retardant performance and small‐scale reaction mechanism on banana/bio‐epoxy composites
- Synthesis and characterization of MgZnCo ternary mixed metal oxide by the sonochemical method for solid hydrogen storage
- Hydrogen Storage Efficiency of LaNi3.6AL0.4Mn0.3Co0.7 Metal Hydride Powder
- Synthesis and characterization of Al+0.25%MWCNTs nanocomposite with reduced thermal expansion coefficient
- Numerical Modeling of Horizontal Axis Wind Turbine: Aerodynamic Performances Improvement Using an Efficient Passive Flow Control System
- Effect of multiwall carbon nanotube (MWCNT) content on thermal and structural properties enhancement of FeCu–MWCNT nanocomposites synthesized by high-energy ball milling
- Numerical study on a porous material subject to SiC particles deposition, using OpenFOAM and sensitivity analysis technique: Effect of clogging evolution on the thermal performances
- Friction stir welding process improvement through coupling an optimization procedure and three-dimensional transient heat transfer numerical analysis
- Computational investigation of heat load and secondary flows near tip region in a transonic turbine rotor with moving shroud
- Impact of Ni-based catalyst patterning on hydrogen production from MSR: External steam reformer modelling
- Effect of inter-catalytic layer spacing at wall-coated steam methane reformer surfaces on hydrogen production
- Estimation of transient heat flux density during the heat supply of a catalytic wall steam methane reformer
- Numerical study on the effects of the macropatterned active surfaces on the wall-coated steam methane reformer performances
- Numerical investigation on the wall-coated steam methane reformer improvement: Effects of catalyst layer patterns and metal foam insertion
- Numerical investigation of convective heat transfer in a plane channel filled with metal foam under local thermal non-equilibrium
- IMPROVEMENT STEAM METHANE REFORMING REACTION OVER A CATALYST SURFACE USING A METAL FOAM SUPPORT
مجلات النشر
- International Journal of Hydrogen Energy × 6
- Applied Physics A × 2
- Experimental Techniques × 2
- International Renewable Energy Congress × 2
- Hydrogen × 1
- Energy Science & Engineering × 1
المنشورات حسب السنة
- 20263
- 20257
- 20246
- 20236
- 20222
- 20201
- 20191
- 20184
- 20171
- 20161
التعاون العلمي
المؤسسات الشريكة : University of Sciences and Technology Houari Boumediene · Université de technologie de belfort-montbéliard · Centre National de la Recherche Scientifique · Laboratoire Interdisciplinaire Carnot de Bourgogne · Université Bourgogne Franche-Comté
بلدان المؤلفين المشاركين : الجزائر · إندونيسيا · المغرب · تونس
المؤلفون المشاركون
- Khaled Chetehouna
- Saïd Abboudi
- Léo Foucault
- Nicolas Gascoin
- Nadhir Lebaal
- Zakaria Mansouri
- Asih Melati
- Nadir Lebaal
- Bouchra Elarfaoui
- Khaled CHETHOUNA
- Mohammad Alkhatib
- Léo Courty
البيانات البيبليوغرافية مصدرها OpenAlex (قاعدة مفتوحة).
لماذا تختارون DzCademia؟
ملفات أكاديمية ومقالات ومداخلات علمية: امنحوا أبحاثكم حضوراً عاماً منظماً. تساعد البيانات الوصفية المدمجة محركات البحث ومساعدات الذكاء الاصطناعي على التعرف على أعمالكم وفهم مراجعها.
علّق عبر Google
سجّل الدخول عبر Google للتعليق مباشرة على هذه الصفحة.