الرئيسية › دليل الباحثين › Fatima Majid
Fatima Majid
الانتماء : Chouaib Doukkali University
- 48منشورات (انتماء مغربي)
- 52مجموع المنشورات
- 414الاستشهادات
- 11مؤشر h
الملف البحثي
لدى Fatima Majid 48 منشور(ات) مفهرسة (2016–2026). تُنشر أعماله أساسًا في «Procedia Structural Integrity»، «Frattura ed Integrità Strutturale» و«Key engineering materials». أكثر مقالاته استشهادًا هو «HDPE pipes failure analysis and damage modeling» (2016)، وقد استُشهد به 62 مرة. 22 من هذه المنشورات تعود إلى آخر ثلاث سنوات من النشاط. شارك في تأليف أعماله 12 باحثًا على الأقل.
هل هذا أنت؟ عرّف بأبحاثك
أنشئ ملفك على DzCademia مجانًا وأضف مقالاتك: ستظهر بسهولة أكبر على Google وفي مساعدي الذكاء الاصطناعي مثل ChatGPT، فيقرؤها ويستشهد بها عدد أكبر من الناس.
إنشاء ملفي المجاني إضافة منشوراتيمجالات البحث
- Fatigue and fracture mechanics
- Additive Manufacturing and 3D Printing Technologies
- Structural Integrity and Reliability Analysis
- Mechanical Behavior of Composites
- Material Properties and Failure Mechanisms
المنشورات (48)
- Damage evolution and fracture behavior in 3D-printed materials: effects of crack propagation and progressive layer degradation
- Experimental calibration of a virtual raster section for high-accuracy FDM simulation in Abaqus
- Numerical and Experimental Insights into Crack Propagation in 3D-Printed ABS Using XFEM and Tensile Analysis
- Optimizing FDM/FFF in Additive Manufacturing: A Review of Process Parameters and Material Impacts on Mechanical Properties
- Processing and characterization of PLA/HA composites reinforced with natural sugarcane powder
- Processing and characterization of PLA/HA composites reinforced with natural sugarcane powder
- Comparative Analysis of Voigt and Self-consistent Models for Predicting Young’s Modulus in Al–SiC, Al–Al₂O₃, and Al–Mgo Functionally Graded Materials
- Optimizing Mechanical Resilience in 3D-Printed Polymers: Exploring Raster Orientation Effects on Fracture Dynamics
- Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading
- Innovative earth–hemp–hydraulic lime bio- and geo-based composite for sustainable seismic applications
- Damage of additively manufactured polymer materials: experimental and probabilistic analysis
- Electrical conductivity and microstructural features of 3D-printed PLA-CB composites fabricated at different temperatures
- Environmentally Friendly PLA-Based Conductive Composites: Electrical and Mechanical Performance
- Predicting the strength of 3D-printed conductive composite under tensile load: A probabilistic modeling and experimental study
- Advancing FDM 3D Printing Simulations: From G-Code Conversion to Precision Modelling in Abaqus
- Nanocomposite dental restorations resin doped with smart antimicrobial agents: Mechanical properties, wear resistance and antimicrobial activities
- Modeling and Simulation of the Influence of 3D Printing Parameters on Crack Propagation: Filament Orientation
- Eco-Friendly Polypropylene Composite Reinforced with Natural Fillers: Mechanical Properties and Wear Resistance
- Improvement of 3D printing polymer simulations considering converting G-code to Abaqus
- Phosphogypsum valorization in cement: Experimental study of the PG effect and the water-to-cement ratio on the flexural strength of cement paste
- Desalination RO reject brine as a novel-based porous geopolymer for phosphorus removal from contaminated media
- Simulation of the Effects of Filament Orientation on Crack Propagation Using Extended Finite Element Method
- Modeling of the fracture behavior of the 3D Printed polymers using XFEM
- A Numerical Study of the Damage Mechanisms for CT Tensile Specimens of P265GH Steel Material
- Delamination effect on the mechanical behavior of 3D printed polymers
- PVC failure modelling through experimental and digital image correlation measurements
- Improvement of crack tip position estimation in DIC images by image processing methods
- Design and Manufacturing of a 3D printer filaments extruder
- Modeling and control of 3D filament extruder
- The effect of using polypropylene fibers on the durability and fire resistance of concrete
- Mechanical behavior and crack propagation of ABS 3D printed specimens
- Mode I stress intensity factors of printed and extruded specimens based on Digital Image Correlation method (DIC): case of ABS material
- Maintainability and reliability of high density polyethylene pipes through experimental and theoretical models
- Probabilistic reliability of thermoplastic piping networks and maintenance strategy choice using Weibull distribution
- Corrosion influence on lifetime prediction to determine the Wöhler curves of outer layer strand of a steel wire rope
- Influence of corrosion on the mechanical behavior of strand of a non-rotating wire rope: experimental study
- Critical lifetime of HDPE pipes through damage and reliability models
- The Experimental Prediction of the Lifetime of Acrylonitrile Butadiene Styrene (ABS) by the Energetic Method
- Energy damage approaches of artificially notched and aged thermoplastic pipes
- Structural integrity of a Doubly Fed Induction Generator (DFIG) of a wind power system (WPS)
- Sub-Synchronous and Hyper-Synchrous Modeling of Doubly Fed Induction Generator (DFIG) Through a Field Oriented Control (FOC)
- Burst behavior of CPVC compared to HDPE thermoplastic polymer under a controlled internal pressure
- Residual life prediction of defected Polypropylene Random copolymer pipes (PPR)
- Mechanical behavior prediction of PPR and HDPE polymers through newly developed nonlinear damage-reliability models
- Continuum damage modeling through theoretical and experimental pressure limit formulas
- Estimation of the damage in doubly notched A36 steel specimens, as a function of the reduction rate of Nf under a loading level Δ σ
- HDPE pipes failure analysis and damage modeling
- Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue
مجلات النشر
- Procedia Structural Integrity × 12
- Frattura ed Integrità Strutturale × 11
- Key engineering materials × 3
- Engineering materials × 3
- Springer Link (Chiba Institute of Technology) × 2
- Engineering Failure Analysis × 2
المنشورات حسب السنة
- 202610
- 20258
- 20244
- 20232
- 20223
- 20213
- 20204
- 20194
- 20183
- 20175
التعاون العلمي
المؤسسات الشريكة : University of Hassan II Casablanca · Université Moulay Ismail de Meknes · Université Hassan II Mohammedia · École Supérieure des Industries du Textile et de l'Habillement · Institut Supérieur d'Études Maritimes
المؤلفون المشاركون
- Taoufik Hachimi
- Hassan Rhanim
- Mohamed Elghorba
- Fouad Ait Hmazi
- Najat Zekriti
- Rajaa Rhanim
- Ibrahim Mrani
- Nassima Naboulsi
- Fatima Ezzahra Arhouni
- Mohammed Ezzahi
- Mohammed Lahlou
- Mohamed El Ghorba
البيانات البيبليوغرافية مصدرها OpenAlex (قاعدة مفتوحة).
لماذا تختارون Dzcademia؟
ملفات أكاديمية ومقالات ومداخلات علمية: امنحوا أبحاثكم حضوراً عاماً منظماً. تساعد البيانات الوصفية المدمجة محركات البحث ومساعدات الذكاء الاصطناعي على التعرف على أعمالكم وفهم مراجعها.
علّق عبر Google
سجّل الدخول عبر Google للتعليق مباشرة على هذه الصفحة.