الرئيسية › دليل الباحثين › Said Mansouri
Said Mansouri
الانتماء : Université Mohammed VI Polytechnique
- 54منشورات (انتماء مغربي)
- 57مجموع المنشورات
- 1306الاستشهادات
- 25مؤشر h
الملف البحثي
لدى Said Mansouri 54 منشور(ات) مفهرسة (2018–2026). تُنشر أعماله أساسًا في «Construction and Building Materials»، «Materials Today Proceedings» و«Ceramics International». أكثر مقالاته استشهادًا هو «Identifying Juncus plant as viable source for the production of micro- and nano-cellulose fibers: Application for PVA composite materials de» (2019)، وقد استُشهد به 80 مرة. 11 من هذه المنشورات تعود إلى آخر ثلاث سنوات من النشاط. شارك في تأليف أعماله 12 باحثًا على الأقل، منهم باحثون من مؤسسات في فرنسا، إسبانيا، اليابان، تنزانيا.
هل هذا أنت؟ عرّف بأبحاثك
أنشئ ملفك على DzCademia مجانًا وأضف مقالاتك: ستظهر بسهولة أكبر على Google وفي مساعدي الذكاء الاصطناعي مثل ChatGPT، فيقرؤها ويستشهد بها عدد أكبر من الناس.
إنشاء ملفي المجاني إضافة منشوراتيمجالات البحث
- Concrete and Cement Materials Research
- Recycling and utilization of industrial and municipal waste in materials production
- Adsorption and biosorption for pollutant removal
- Petroleum Processing and Analysis
- Adsorption, diffusion, and thermodynamic properties of materials
المنشورات (54)
- Biodegradable PLA/ZnO-coated cotton fabrics via solution blow spinning for efficient oil-water separation, self-cleaning, and antimicrobial applications
- Fabrication of bio-based cellulose-stabilized TiO2/ZnO nanocomposite coatings for multifunctional cotton fabrics with synergistic flame retardancy, photocatalytic self-cleaning, and antibacterial activity
- Biodegradable Conductive PLA /Polypyrrole Composite Films With Tunable Percolation Behavior for Flexible Green Electronics
- Compressive strength optimization of the ambient-cured metakaolin-based geopolymer mortar using the Taguchi design approach
- Resource recovery from potash brine effluent: integrated chemical precipitation and evaporative crystallization for zero liquid discharge and sustainable brine management
- Sustainable geopolymer synthesis catalyzed by hexafluorosilicic acid: A low-energy approach using phosphate industrial waste
- Assessing the long-term structural changes of metakaolin geopolymers encapsulating pyrite cinder: environmental, microstructural and structure studies
- Effect of firing temperature on porous ceramic properties fabricated by Moroccan red clay and oil shale
- Sustainable valorization of food waste into a pore-forming agent for ceramic membrane production: Experimental and DFT studies on methylene blue dye removal
- Eco-friendly and cost-effective synthesis of hierarchical porous HKUST-1 from thin waste electric cables for enhanced cationic dye removal
- Enhanced electrochemical performance of MgFeO4 spinel as anode materials for Lithium-ion batteries through manganese doping
- Treatment of seawater and wastewater using a novel low-cost ceramic membrane fabricated with red clay and tea waste
- Valorization of phosphogypsum waste through acid geopolymer technology: synthesis, characterization, and environmental assessment
- Enhanced mechanical strength of micro-porous ceramics through the removal of alkaline earth carbonates from Moroccan red clay for membrane support application
- Effect of natural graphite additions on the microstructural and mechanical behavior of metakaolin based geopolymer materials
- Valorization of ceramic sanitary waste into Resilient phosphoric acid-based geopolymers for sustainable construction: Thermal, mechanical, and microstructural properties
- Comprehensive experimental analysis of igneous ultra-mafic rocks as thermal energy storage materials
- Effect of indium (III) doping on Ag3PO4 catalyst stabilization and its visible light photocatalytic activity toward toxic dyes in water
- The effect of various parameters on the supercritical extraction of Moroccan oil shales: Application in the elaboration of carbon foams and graphitizable carbons
- Eco-friendly geopolymer concrete based on metakaolin and ceramics sanitaryware wastes
- Adsorptive removal of Cr(VI) by Chitosan-SiO2-TiO2 nanocomposite
- Microstructure and flexural performances of glass fibers reinforced phosphate sludge based geopolymers at elevated temperatures
- Enhanced inorganic salts stability using bentonite clay for high-performance and low-cost thermochemical energy storage
- ZnO-Zn2TiO4 heterostructure for highly efficient photocatalytic degradation of pharmaceuticals
- Adsorption of the crystal violet dye on an adsorbent material prepared from Moroccan oil shales
- An advance understanding of the alkali activation of cover layers waste rocks from phosphate mines: Mechanical, structure and microstructure studies
- Effect of processing conditions on the improvement of properties and recovering yield of Moroccan oil shale
- Structural, Morphological and Optical Properties of Cu2MSnS4 (M = Cu0.5Ni0.5) Synthesized by a Simple and Low Cost Electrodeposition Technique
- Synthesis of a new Cu2MgGeS4 quaternary compound thin film by a low-cost spray method: Structural, Raman and optical properties
- ZnO–Al2O3–CeO2–Ce2O3 mixed metal oxides as a promising photocatalyst for methyl orange photocatalytic degradation
- Adsorption of ciprofloxacin antibiotic on materials prepared from Moroccan oil shales
- Eco-friendly Geopolymer Composite Based on Non-heat-treated Phosphate Sludge Reinforced With Polypropylene Fibers
- Ambient Pressure Drying as an Advanced Approach to the Synthesis of Silica Aerogel Composite for Building Thermal Insulation
- Effect of synthetic fibers on the properties of geopolymers based on non-heat treated phosphate mine tailing
- Effect of alkali-mixed content and thermally untreated phosphate sludge dosages on some properties of metakaolin based geopolymer material
- New hybrid graphene/inorganic salt composites for thermochemical energy storage: Synthesis, cyclability investigation and heat exchanger metal corrosion protection performance
- Thermal, mechanical and microstructural properties of acidic geopolymer based on moroccan kaolinitic clay
- Comparison of chemical and physical activation processes at obtaining adsorbents from Moroccan oil shale; pp. 139–157
- Effect of Sodium Hexafluorosilicate Addition on the Properties of Metakaolin Based Geopolymers Cured at Ambient Temperature
- Statistical modeling of geopolymers from dual-alkali activation of un-calcined phosphate sludge and their potential applications as sustainable coating materials
- Optimization of operational conditions using the experimental design method to remove Escherichia coli from contaminated groundwater by an adsorbent material prepared from Moroccan oil shales
- Green and low-cost approach for graphene oxide reduction using natural plant extracts
- Preparation and characterization of Cu2FeGeS4 thin-film synthesized via spray ultrasonic method − DFT study
- Structural, electronic and optical properties of a tetragonal-stannite Cu2CoGeS4 thin film synthesized by a low-cost spray method: Experimental and theoretical study
- Sub and super-critical extraction of oils from Moroccan oil shale with ammonia
- Optimization Studies of Porous Carbon Preparation from Oil Shale Using Response Surface Methodology and Its Application for Phenol Adsorption
- Elaboration and Characterization of Porous Materials from Moroccan Natural Resources: Application to Industrial Wastewater Treatment
- Identifying Juncus plant as viable source for the production of micro- and nano-cellulose fibers: Application for PVA composite materials development
- Alfa fiber-polyurethane composite as a thermal and acoustic insulation material for building applications
- Preparation and characterization of Cu2CoSnS4 thin films for solar cells via co-electrodeposition technique: Effect of electrodeposition time
- Assessment of the electrochemical behaviour of Nickel-Titanium-based orthodontic wires: Effect of some natural corrosion inhibitors in comparison with fluoride
- Applying Response Surface Methodology to optimize the decarbonization process of Timahdit oil shale
- Elaboration Of Novel Adsorbent From Moroccan Oil Shale Using Plackett–Burman Design
- Modeling Using the Response Surface Methodology the Activation Process of Moroccan Oil Shale for Removal of Cd (II)
مجلات النشر
- Construction and Building Materials × 3
- Materials Today Proceedings × 3
- Ceramics International × 3
- Oil Shale × 3
- Sustainable materials and technologies × 2
- Arabian Journal of Chemistry × 2
المنشورات حسب السنة
- 20263
- 20254
- 20244
- 20238
- 202210
- 20214
- 202014
- 20195
- 20182
التعاون العلمي
المؤسسات الشريكة : University of Hassan II Casablanca · Mohammed V University · Université Hassan 1er · Cadi Ayyad University · Université Sultan Moulay Slimane
بلدان المؤلفين المشاركين : فرنسا · إسبانيا · اليابان · تنزانيا
المؤلفون المشاركون
- Hassan Hannache
- Youssef Tamraoui
- Bouchaib Manoun
- Mina Oumam
- Hicham Majdoubi
- Younesse Haddaji
- Jones Alami
- Mina Oumam
- Mossaab Mouiya
- Y. Abouliatim
- Abdelkrim Abourriche
- Said Sair
البيانات البيبليوغرافية مصدرها OpenAlex (قاعدة مفتوحة).
لماذا تختارون Dzcademia؟
ملفات أكاديمية ومقالات ومداخلات علمية: امنحوا أبحاثكم حضوراً عاماً منظماً. تساعد البيانات الوصفية المدمجة محركات البحث ومساعدات الذكاء الاصطناعي على التعرف على أعمالكم وفهم مراجعها.
علّق عبر Google
سجّل الدخول عبر Google للتعليق مباشرة على هذه الصفحة.