الرئيسية › دليل الباحثين › Brahim Safi
Brahim Safi
الانتماء : University of Boumerdes
- 74منشورات (انتماء جزائري)
- 106مجموع المنشورات
- 985الاستشهادات
- 14مؤشر h
هل هذا أنت؟ عرّف بأبحاثك
أنشئ ملفك على DzCademia مجانًا وأضف مقالاتك: ستظهر بسهولة أكبر على Google وفي مساعدي الذكاء الاصطناعي مثل ChatGPT، فيقرؤها ويستشهد بها عدد أكبر من الناس.
إنشاء ملفي المجاني إضافة منشوراتيمجالات البحث
- Concrete and Cement Materials Research
- Innovative concrete reinforcement materials
- Materials Engineering and Processing
- Recycled Aggregate Concrete Performance
- Recycling and utilization of industrial and municipal waste in materials production
المنشورات (74)
- Modeling the Mechanical Bending Behavior of Steel Fiber-Reinforced Self-Compacting Mortars: Analysis of Fiber Distribution Effect
- Characterization of PAMPS/PDADMAC Polyelectrolyte Complexes in Aqueous Media: Effect of Intrinsic and Extrinsic Parameters
- Sustainable Bio-Based Rosin–Epoxy Composites: From Pine Forests to Polymers via Processing–Structure–Property Optimization
- Synthesis of TiC Nanocarbide from Recycled Machined Ti Chips and Graphite Powder via Mechanical Alloying
- Used Foundry Sand as a Replacement for Sand in Concrete
- Mechanical Characterization of Composites Structures Using the NDT
- Sustainable Ceramic Tiles from Recycled Glass and Bentonite: Microstructure, Properties and Energy-Efficient Processing
- Damage assessment and structural performance analysis of stitched and unstitched composite laminates (carbon jute FRP) using experimental, numerical, and machine learning approaches (ANN-PSO)
- Synthesis of resin from Alfa stem to applied as an adhesive corrosion-resistant coating
- Effects of Sea Sand and Fly Ash on the Compressive Strength of Concrete
- An Ecological Cement Mortar Produced by Using Nanosilica and High Content of Metallurgical Waste Slag: Rheological, Mechanical, and Chemical Durability Study
- Advanced degradation of hydrocarbons without UV source: Efficiency of TiO2 and ZnO nanocatalysts
- Experimental and numerical investigation of impact behavior in honeycomb sandwich composites
- Assessing the Utilization of Sawdust in Water-Based Drilling Fluid for Managing Fluid Loss and Enhancing Viscosity
- Evaluation of Viscoelastic Performance and Molecular Structures of Natural Rubber/NBR Blends Reinforced by Carbon Black and Nano-Silica
- Rheological and mechanical behavior study of eco-friendly cement mortar made with marble powder
- MECHANICAL CHARACTERIZATION AND IMPACT RESISTANCE OF A NOVEL HYBRID COMPOSITE BASED ON SALVADORA PERSICA ROOTS AND GLASS FIBERS
- Microstructural and Thermal Properties of the Mechanically Alloyed Fe3Al Powders Doped with Boron
- Evaluation of Reuse and Recycling Disaster Waste Materials for Post-disaster Shelter with Compressive Strength Testing and Case Study in Cianjur, Indonesia
- Properties and Processing Technologies for Modern Structural Materials: Nanocomposite, Steel and Alloy
- Geostatistical Spatial Decision-Making for Identifying Road Hazardous Road Segments in Rural Areas
- Reuse of Fine Concrete Demolition Wastes as a Supplementary Cementitious Material in Concrete
- ASSESSING THE EFFECTIVENESS OF DUNE SAND AS A SUPPLEMENTARY CEMENTITIOUS MATERIAL TO PRODUCE ADHESIVE MORTARS
- Rheological behavior of polymer-based drilling fluids: experimental study of temperature effects
- Using glass wastes and bentonite to produce a new ceramic tile
- Study of Composite Pipelines Damaged by Corrosion: Control by Non-Destructive Testing
- RETRACTED: Valorisation of Alfa stem in synthesis of lignin –phenol -formaldehyde resin: Application as an adhesive corrosion-resistant coating
- Annealing Effect on Copper-Doped Sodium Borate Glasses (Na2O.4B2O3)
- Recycling of foundry sand wastes in self-compacting concretes: Use as cementitious materials and fine aggregates
- EFFECT OF NANOSILICA-DOPED SUPERPLASTICIZER ON THE PROPERTIES OF CEMENT MORTARS
- PHYSICO-MECHANICAL CHARACTERIZATION OF AN ECOLOGICAL MARBLE BASED- MORTAR
- Crack Growth Diagnostic of Ball Bearing Using Vibration Analysis
- Durability of Different UHPFRCs, Made from Pozzolan as a Substitute for Portland Cement and Immersed in Two Aggressive Environments of Hydrochloric and Sulfuric Acids
- Effect of metakaolin as partially cement replacement on the compressive strength of standard mortars
- Foamed glass granulated-based self-compacting mortars: open-porosity effect on rheological and mechanical properties
- Highlighting of the distribution effect of steel hook fibers at low and high dosage on the flexural strength of self-compacting mortars
- Effect of Stitch Orientation on Tensile and Flexural Bending Mechanical Properties and Damage Mechanisms of Glass/Epoxy Composites Laminate
- Effect of Fiber Distribution on the Mechanical Behavior in Bending of Self-Compacting Mortars
- Comparative Life Cycle Assessment of Two Types of Truck Bumper Produced in the Algerian Auto Industry
- An experimental study on damaged cementitious mortars repaired by glass/epoxy composite materials
- Mechanical behavior and chemical durability of marble-based mortar: Application to panels subjected to punching
- Recycling of Foundry Sand Wastes in Self-Compacting Mortars: Use as Cementitious Materials and Fine Aggregates
- Effect of Natural Pozzolan and Calcined Paper Sludge as Pozzolanic Additions on the Physicals and Mechanicals Properties of Heat Treated Self-Compacting Mortars
- Effect of Natural Pozzolan and Calcined Paper Sludge as Pozzolanic Additions on the Physicals and Mechanicals Properties of Heat Treated Self-Compacting Mortars
- An ecological water-based drilling mud (WBM) with low cost: substitution of polymers by wood wastes
- Incorporation mode effect of Nano-silica on the rheological and mechanical properties of cementitious pastes and cement mortars
- Influence of amorfous nano-silica addition on properties of fresh cement paste and hardened cement mortar
- Material Fracture of Dynamic VAWT Blade
- Experimental and Numerical Damaged Characteristics in Composite Plate with Crack Growth by Vibration Analysis
- Characterization of “Float Glass” Eroded by Sandblasting
- Use of refractory bricks as sand replacement in self-compacting mortar
- Valorization of KCl/PHPA system of water-based drilling fluid in presence of reactive clay: Application on Algerian field
- Granulated foam glass based on mineral wastes used for building materials
- A comparative study of the creep behavior of laminated composites: Effect of type of fiber and matrix
- Wave propagation induced by a moving rectangular load acting on a porous medium
- Reuse of Refractory Brick Wastes (RBW) as a Supplementary Cementitious Material in a Concrete
- Effect of mineral additives (natural pozzolana and sand of dunes) by substitution of cement on the performance and durability of mortars
- The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)
- Physico-chemical and rheological characterization of water-based mud in the presence of polymers
- Rheological behavior of an Algerian crude oil containing Sodium Dodecyl Benzene Sulfonate (SDBS) as a surfactant: Flow test and study in dynamic mode
- Improved behaviour of mortars at a high temperature by using refractory brick wastes
- Physico-mechanical properties and thermal behavior of firebrick-based mortars in superplasticizer presence
- Use of wood waste (Aleppo pine) as a superplasticiser in self-compacting mortars
- The fatigue flexural behavior of fiber reinforced concrete: Effect of the parameters of coarse aggregates
- Comparative Study of Biopolymers Action on Physico-Chemical and Rheological Properties of Water-Based Drilling Muds
- Effect of the heat curing on strength development of ultra-high performance fiber reinforced concrete (UHPFRC) containing dune sand and ground brick waste
- Effect Of The Heat Curing On Strength Development Of Ultra-High Performance Fiber Reinforced Concrete (Uhpfrc) Containing Dune Sand And Ground Brick Waste
- Influence of nanosilica and a polycarboxylate superplasticizer on the rheological and electrokinetical properties of cement pastes
- The use of plastic waste as fine aggregate in the self-compacting mortars: Effect on physical and mechanical properties
- Effect of the heat curing on strength development of self-compacting mortars containing calcined silt of dams and Ground Brick Waste
- Effect of Alkalinity and the Nature of the Basic Solution [Ca(OH)2 and Ba(OH)2] on the Zeta Potential and Rheological Properties of the Drilling Mud
- SIMULATION AND MODELING THE DEFERRED BEHAVIOR INDUCED BY THE CREEP OF A REINFORCED CONCRETE SECTION
- Rheology and zeta potential of cement pastes containing calcined silt and ground granulated blast-furnace slag
- Effect of isothermal heat treatment time on structural transformation and crystallization of B2O3-PbO glass
المؤلفون المشاركون
- Mohammed Saidi
- H. Mechakra
- Djamila Aboutaleb
- Abdelbaki Benmounah
- Ahmed Chellil
- Samir Lecheb
- Kahina Chahour
- Chouaib Aribi
- Youcef Ghernouti
- Abdelhakim Daoui
- Lynda Kheddache
- Belaid Amrane
البيانات البيبليوغرافية مصدرها OpenAlex (قاعدة مفتوحة).
لماذا تختارون Dzcademia؟
ملفات أكاديمية ومقالات ومداخلات علمية: امنحوا أبحاثكم حضوراً عاماً منظماً. تساعد البيانات الوصفية المدمجة محركات البحث ومساعدات الذكاء الاصطناعي على التعرف على أعمالكم وفهم مراجعها.
علّق عبر Google
سجّل الدخول عبر Google للتعليق مباشرة على هذه الصفحة.