Home › Researcher directory › J.C. Bérnède
J.C. Bérnède
Affiliation : Centre National de la Recherche Scientifique · Institut des Sciences et Technologies Moléculaires d'Angers · Université d'Angers · Nantes Université
- 130Publications (affiliation in France)
- 488Total publications
- 9296Citations
- 51h-index
Research profile
J.C. Bérnède has 130 indexed publications (2002–2024). Their work appears mainly in “Solar Energy Materials and Solar Cells”, “The European Physical Journal Applied Physics” and “Applied Surface Science”. Their most cited article, “Physico-chemical, optical and electrochemical properties of iron oxide thin films prepared by spray pyrolysis” (2006), has been cited 131 times. 7 of these publications date from the last three years of activity. Their work is co-authored with at least 12 researchers, including institutions in Morocco, Algeria, Tunisia, Egypt.
Is this you? Get your research seen
Create your free DzCademia profile and add your articles: they will show up more easily on Google and in AI assistants like ChatGPT, so more people can read and cite your work.
Create my free profile Add my publicationsResearch areas
- Organic Electronics and Photovoltaics
- Chalcogenide Semiconductor Thin Films
- Organic Light-Emitting Diodes Research
- Conducting polymers and applications
- Phase-change materials and chalcogenides
Publications (130)
- Selective growth and unveiling semiconductor nanostructured based La,Mo and O elements: Structural, morphological, and optical investigations
- Nanostructured solar cells based on MoO3 film deposition
- Corrigendum to “The effect of the band structure on the Voc value of ternary planar heterojunction organic solar cells based on pentacene, boron subphthalocyanine chloride and different electron acceptors” [J. Phys. Chem. Solids 136 (2020) 109142]
- Efficient and Facile Synthetic Route of MoO3:MoS2 Hybrid Thin Layer via Oxidative Reaction of MoS2 Nanoflakes
- Low temperature synthesis of MoS2 and MoO3:MoS2 hybrid thin films via the use of an original hybrid sulfidation technique
- Investigation of the different possible energy band structure configurations for planar heterojunction organic solar cells
- Ternary Planar Heterojunction Organic Solar Cells Based on the Ternary Active Layers: α-6T/AlPcCl/C60
- Investigation of aluminum phthalocyanine chloride as acceptor material in planar organic solar cells: comparative study with fullerene
- Efficient planar heterojunction based on α-sexithiophene/fullerene through the use of MoO3/CuI anode buffer layer
- Improvement of inverted planar heterojunction solar cells efficiency by using KI/Alq3 hybrid exciton blocking layer
- On the use of multiple stacked active layers in organic photovoltaic cells
- On the contribution of fullerene to the current of planar heterojunction organic solar cells
- New electron donor in planar heterojunction: optimization of the cells efficiency through the choice of the hole-extracting layer
- The effect of the band structure on the Voc value of ternary planar heterojunction organic solar cells based on pentacene, boron subphthalocyanine chloride and different electron acceptors
- New dielectric/metal/dielectric electrode for organic photovoltaic cells using Cu:Al alloy as metal
- Open circuit voltage of organic photovoltaic cells using C60 as acceptor: variation with the donor
- Investigation of Microstructural and Optical Properties of Ag3O4 Thin Films Sprayed onto Glass Substrate
- COMPARISON OF PERFORMANCES OF ORGANIC PHOTOVOLTAIC CELLS USING SubPc AS CENTRAL AMBIPOLAR LAYER IN TERNARY STRUCTURES AND AS ELECTRON ACCEPTOR IN BINARY STRUCTURES
- Linear and non linear optical properties of Sb2Se3 thin films elaborated from nano-crystalline mechanically alloyed powder
- Indium free electrode, highly flexible, transparent and conductive for optoelectronic devices
- Comparison of performances of three active layers cascade OPVCs with those obtained from corresponding bi-layers
- Stabilisation of Cu films in WO3/Ag/Cu:Al/WO3 structures through their doping by Al and Ag
- Highlighting the possibility of parallel mechanism in planar ternary photovoltaic cells
- Open Circuit Voltage of Organic Photovoltaic Cells using Free Acceptor
- Stabilisation Attempts of the Electrical and Optical Properties of Oxide/Cu/Oxide Structures Through the Use of Different Cu:M Alloys
- Structural characterization and optical constants of CuIn3Se5 vacuum and air annealed thin films
- Dielectric/metal/dielectric alternative transparent electrode: observations on stability/degradation
- Stabilisation of the electrical and optical properties of dielectric/Cu/dielectric structures through the use of efficient dielectric and Cu:Ni alloy
- Mo(S x O y ) thin films deposited by electrochemistry for application in organic photovoltaic cells
- The Influence of Deposition Rates on Properties of AlPcCl Thin Films and on the Performance of Planar Organic Solar Cells
- Nano-Crystalline Thermally Evaporated Bi2Se3 Thin Films Synthesized from Mechanically Milled Powder
- Investigation of CuIn1-xGaxSe2 thin films co-evaporated from two metal sources for photovoltaic solar cells
- Annealing effect on physical properties of evaporated molybdenum oxide thin films for ethanol sensing
- Ca/Alq3 hybrid cathode buffer layer for the optimization of organic solar cells based on a planar heterojunction
- Cu-Ag bi-layer films in dielectric/metal/dielectric transparent electrodes as ITO free electrode in organic photovoltaic devices
- Efficient hole‐transporting layer MoO3:CuI deposited by co‐evaporation in organic photovoltaic cells
- Preparation and characterization of highly transparent and conductive indium-zinc oxide thin films deposited by pyrolysis spray technique
- Classical or inverted photovoltaic cells: On the importance of the morphology of the organic layers on their power conversion efficiency
- Importance of the electrode conductivity in organic photovoltaic solar cells
- Improving the efficiency of subphthalocyanine based planar organic solar cells through the use of MoO3/CuI double anode buffer layer
- Improvement of pentathiophene/fullerene planar heterojunction photovoltaic cells by improving the organic films morphology through the anode buffer bilayer
- Copper:molybdenum sub-oxide blend as transparent conductive electrode (TCE) indium free
- Morphological and physicochemical properties of dip-coated poly {(2,5-diyl pyrrole) [4-nitrobenzylidène]} (PPNB) thin films: towards photovoltaic applications
- OPTIMUM COMPROMISE BETWEEN OPTICAL ABSORPTION AND ELECTRICAL PROPERTY OF THE PLANAR MULTI-HETEROJUNCTION ORGANIC SOLAR CELLS BASED WITH NEW THIAZOL DERIVATIVE, THE (2-THIOXO-3-N-(2-METHOXYPHENYL) THIAZOLIDIN-4-ONE), AS ELECTRON DONOR
- Broadening of the transmission range of dielectric/metal multilayer structures by using different metals
- Physical investigations on (In2S3)x(In2O3)y and In2S3−xSex thin films processed through In2S3 annealing in air and selenide atmosphere
- On the exciton blocking layer at the interface organic/cathode in planar multiheterojunction organic solar cells
- Improved electron collection in fullerene via caesium iodide or carbonate by means of annealing in inverted organic solar cells
- Influence of annealing and processing conditions on nano-structured thin films of tungsten trioxide
- Highly flexible, conductive and transparent MoO 3 /Ag/MoO 3 multilayer electrode for organic photovoltaic cells
- Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers
- MoO3/CuI hybrid buffer layer for the optimization of organic solar cells based on a donor–acceptor triphenylamine
- Study of CuI thin films properties for application as anode buffer layer in organic solar cells
- The lithium effect on the blue and red emissions of Er-doped zinc oxide thin films
- Fabrication Parameter Optimization for a Multilayer Photovoltaic Cell Based on the Heterojunction: Zinc(II)-Meso-Tetrakis(4-Bromophenyl) Porphyrins/Fullerenes
- XPS study of the band alignment at ITO/oxide (n‐type MoO3 or p‐type NiO) interface
- MoO3/Ag/MoO3 anode in organic photovoltaic cells: Influence of the presence of a CuI buffer layer between the anode and the electron donor
- New Polymers Based on 2,6-di(thiophen-2-yl)aniline and 2,2'- (thiophen-2,5-diyl)dianiline Monomers. Preparation, Characterization and Thermal, Optical, Electronic and Photovoltaic Properties.
- Effect of the nature of the anode buffer layer – MoO3, CuI or MoO3/CuI – on the performances of organic solar cells based on oligothiophene thin films deposited by sublimation
- Realization of tin oxide like anode for the manufacture of the organic solar cells
- On the Exciton Blocking Layer at the Interface Organic/Cathode in Multiheterojunction Organic Solar Cells
- Towards anode with low indium content as effective anode in organic solar cells
- Nanostructured thermally evaporated CuInSe2 thin films synthesized from mechanically alloyed powders and self-combustion ingot
- The effects of sprayed lithium and erbium Co-doped ZnO thin films on the structural and cathodoluminescent properties
- Influence of anode roughness and buffer layer nature on organic solar cells performance
- Influence of the exciton blocking layer on the stability of layered organic solar cells
- Electrochemical preparation of MoO3 buffer layer deposited onto the anode in organic solar cells
- MoO 3 surface passivation of the transparent anode in organic solar cells using ultrathin films
- ZnO thin films fabricated by chemical bath deposition, used as buffer layer in organic solar cells
- Properties of NiO thin films deposited by chemical spray pyrolysis using different precursor solutions
- Ultra-thin metal layer passivation of the transparent conductive anode in organic solar cells
- Organic light emitting diodes using fluorine doped tin oxide thin films, deposited by chemical spray pyrolysis, as anode
- Effect of microwaves on synthesis of MoS2 and WS2
- On the improvement of the efficiency of organic photovoltaic cells by the presence of an ultra-thin metal layer at the interface organic/ITO
- Cathodoluminescent and nonlinear optical properties of undoped and erbium doped nanostructured ZnO films deposited by spray pyrolysis
- Characterisation of porous doped ZnO thin films deposited by spray pyrolysis technique
- The open circuit voltage of encapsulated plastic photovoltaic cells
- Electrical and optical characterisation of CuInS2 crystals and polycrystalline coevaporated thin films
- Optimisation of the interface “organic material/aluminium” of CuPc/C60based photovoltaic cells
- Electrical properties of CuGaSe2 single crystals and polycrystalline coevaporated thin films
- Physico-chemical, optical and electrochemical properties of iron oxide thin films prepared by spray pyrolysis
- Properties of NiO thin films deposited by intermittent spray pyrolysis process
- Growth and characterization of CuFeS2 thin films
- Effect of S/In concentration ratio on the physical properties of AgInS2-sprayed thin films
- Fabrication of n- and p-type doped CuFeSe 2 thin films achieved by selenization of metal precursors
- Effect of the zinc composition on the formation of ternary alloy Cd1−xZnxTe thin films
- Properties of ZnO thin films deposited by chemical bath deposition and post annealed
- Electrical and optical study of Cu(In, Ga)Se2 co-evaporated thin films
- Effect of the precursor solution concentration on the NiO thin film properties deposited by spray pyrolysis
- Effect of tin incorporation on physicochemical properties of ZnO films prepared by spray pyrolysis
- Some physical investigations on AgInS2 sprayed thin films
- Characterization of FeS2-pyrite thin films synthesized by sulphuration of amorphous iron oxide films pre-deposited by spray pyrolysis
- Structural and optical properties of CuAlTe2thin films prepared by RF. sputtering
- Comparison of the physico-chemical properties of NiO thin films deposited by chemical bath deposition and by spray pyrolysis
- Transformation of amorphous iron oxide thin films predeposited by spray pyrolysis into a single FeSe2-phase by selenisation
- Transformation of amorphous iron oxide films pre-deposited by spray pyrolysis into FeS2-pyrite films
- X-ray photoelectron spectroscopy study of CuFeSe2 thin films
- Erratum to “A study of textured non-stoichiometric MoTe2 thin films used as substrates for textured stoichiometric MoS2 thin films” [Vacuum 72 (2004) 351–361]
- A study of textured non-stoichiometric MoTe2 thin films used as substrates for textured stoichiometric MoS2 thin films
- Preparation of iron selenide films by selenization technique
Publication venues
- Solar Energy Materials and Solar Cells × 10
- The European Physical Journal Applied Physics × 8
- Applied Surface Science × 7
- Vacuum × 5
- physica status solidi (a) × 5
- Journal of Physics and Chemistry of Solids × 4
Publications per year
- 20241
- 20232
- 20224
- 20213
- 20203
- 20195
- 20187
- 20177
- 20167
- 20155
Collaborations
Partner institutions : Université de Nantes · Institut des Matériaux Jean Rouxel · Abdelmalek Essaâdi University · Université Ibn-Tofail · Université Nantes Angers Le Mans
Co-authors’ countries : Morocco · Algeria · Tunisia · Egypt
Co-authors
- L. Cattin
- M. Morsli
- Guy Louarn
- Zouhir El Jouad
- Nicolas Stéphant
- J. Pouzet
- Hind Lamkaouane
- Hajar Ftouhi
- Ludovic Arzel
- M. Hssein
- Zouhair El Jouad
- H. Essaidi
Bibliographic data from OpenAlex (open database).
Why choose Dzcademia?
Profiles, articles and conference contributions: give your research a structured public presence. Integrated metadata help search engines and AI assistants identify your work and understand its references.
Comment with Google
Sign in with Google to comment directly on this page.