Accueil › Annuaire des chercheurs › B. Benyoucef
B. Benyoucef
Affiliation : University of Abou Bekr Belkaïd
- 124Publications (affiliation algérienne)
- 207Publications au total
- 2377Citations
- 26Indice h
Profil de recherche
B. Benyoucef compte 124 publications référencées (2008–2024). Ses travaux paraissent principalement dans « Physics Procedia », « Journal of Renewable Energies » et « Energy Procedia ». Son article le plus cité, « In-situ monitoring of the curing of epoxy resins by Raman spectroscopy » (2008), a été cité 111 fois. 9 de ces publications datent des trois dernières années d’activité. Ses travaux sont cosignés avec au moins 12 chercheurs, notamment dans des établissements de France, Tunisie, Koweït, Suède.
C’est vous ? Faites connaître vos travaux
Créez gratuitement votre profil DzCademia et ajoutez vos articles : ils apparaîtront plus facilement sur Google et dans les assistants d’IA comme ChatGPT. Plus de personnes pourront vous lire et vous citer.
Créer mon profil gratuit Ajouter mes publicationsDomaines de recherche
- Solar Thermal and Photovoltaic Systems
- Photovoltaic System Optimization Techniques
- Silicon and Solar Cell Technologies
- Thin-Film Transistor Technologies
- ZnO doping and properties
Publications (124)
- Low-Reynolds-number turbulent forced-convection flow over graded baffle plates
- Enhancement in Efficiency of CIGS Solar Cell by Using a p-Si BSF Layer
- Numerical investigation of octakis (4-methoxyphenyl) spiro [fluorene-9, 9′ xanthene]−2, 2′, 7, 7′-tetraamine) (X60) as hole transport layer in solid-state dye-sensitized solar cell
- Etude statistique du rayonnement solaire à Alger
- Influence of passive solar gains on the energy consumption of a typical house in Algiers
- Modélisation des isothermes de sorption des feuilles de marjolaine
- L’impact environnemental d’une habitation écologique
- Abondance relative de l’azote dans quatre nébuleuses galactiques Impact sur les énergies renouvelables à partir de l’étoile Soleil (NGC 2818, He 2-130, NGC 2346, NGC 3132)
- La construction écologique en Algérie: Question de choix ou de Moyens?
- Simulation of different modes of heat transfer on a parabolic trough solar collector
- Analysis of thermo-hydraulic performance of a solar air heater tube with modern obstacles
- Mono-crystalline silicon photovoltaic cells under different solar irradiation levels
- An improved DC-DC converter with high voltage gain based on fully tapped quadratic boost converter for grid connected solar PV micro-inverter
- Baffle orientation and geometry effects on turbulent heat transfer of a constant property incompressible fluid flow inside a rectangular channel
- Numerical analysis of heat and nanofluid mass transfer in a channel with detached and attached baffle plates
- Exploring N3 ruthenium dye adsorption onto ZnTiO3 (101) and (110) surfaces for dye sensitized solar cell applications: Full computational study
- Heat and nanofluid transfer in baffled channels of different outlet models
- Heat Transfer in Air Flow Past a Bottom Channel Wall-Attached Diamond-Shaped Baffle – Using a CFD Technique
- Computational Fluid Dynamics Based Numerical Simulation of Thermal and Thermo-hydraulic Performance of a Solar Air Heater Channel Having Various Ribs on Absorber Plates
- Study of air flow around flat and arc-shaped baffles in shell-and-tube heat exchangers
- Investigation of triphenylamine-based sensitizer characteristics and adsorption behavior onto ZnTiO3 perovskite (1 0 1) surfaces for dye-sensitized solar cells using first-principle calculation
- Study of Models Using One or Two Exponentials to Simulate the Characteristic Current-voltage of Silicon Solar Cells
- Preparation and Characterization of the Mechanical Properties of TiO2/Epoxy Resin Nanocomposites by Differential Scanning Calorimetry and Raman Spectroscopy
- Monte Carlo Calculations of Energy and Drift Velocity in ZnS, ZnSe, ZnTe
- Optimization and Evaluation of the Photovoltaic System in a Farm Studio Located in Ghardaïa
- MATHEMATICAL MODELING OF SOLAR DRYING OF TOMATOES MODELISATION MATHEMATIQUE DU SECHAGE SOLAIRE DES TOMATES
- Experiment and simulation of electrolytic hydrogen production: Case study of photovoltaic-electrolyzer direct connection
- Optimization by simulation of the nature of the buffer, the gap profile of the absorber and the thickness of the various layers in CZTSSe solar cells
- Thickness optimization of the ZnO based TCO layer in a CZTSSe solar cell. Evolution of its performance with thickness when external temperature changes.
- Influence of the spectral distribution of light on the characteristics of photovoltaic panel. Comparison between simulation and experimental
- Technical and economic analysis of hybrid solar/wind energy source for the site of Tlemcen-Algeria
- Viability study of the use of grid connected photovoltaic system in agriculture: Case of Algerian dairy farms
- First-Principles Study of Structural, Optical, and Thermodynamic Properties of ZnIn2X4 (X = Se, Te) Compounds with DC or DF Structure
- Performances and failure of field-aged PV modules operating in Saharan region of Algeria
- Simulation of the outdoor energy efficiency of an autonomous solar kit based on meteorological data for a site in Central Europa
- Improvement of parameters in a-Si(p)/c-Si(n)/a-Si(n) solar cells
- Morphological and Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis on Glass Substrates at Various Temperatures for Integration in Solar Cell
- Structural, Optical and Electrical Properties of Sn-doped Zinc Oxide Transparent Films Interesting for Organic Solar Cells (OSCs)
- Enhanced electrical model for dye-sensitized solar cell characterization
- Temperature Effect of Electrical Properties of Cigs Solar Cell
- Contribution to the Control of the Heliostat Motor of a Solar Tower Power Plant Using Intelligence Controller
- Study of the influence of GPV's tilt angle on the end product: Case study of hydrogen production
- Evaluation of the Use of a Solar Source for Air Conditioning for Home in Algeria
- Study of Performances of Organic Solar Cells by Analysis of Main Components
- Effect of tin doping on optical properties of nanostructured ZnO thin films grown by spray pyrolysis technique
- Influence of the Thickness on Optical Properties of Sprayed ZnO Hole-blocking Layers Dedicated to Inverted Organic Solar Cells
- Electrical Characterization of n-ZnO/p-Si Heterojunction Prepared by Spray Pyrolysis Technique
- Optical, electrical and structural properties of nano-pyramidal ZnO films grown on glass substrate by spray pyrolysis technique
- Thermal characterization of polymer matrix composites containing microencapsulated paraffin in solid or liquid state
- Electrical Characteristics of Ultraviolet Photodetector based on ZnO Nanostructures
- Effect of the Temperature on ZnO Thin Films Deposited by r.f. Magnetron.
- Influence of Al-doped ZnO Transparent Contacts Deposited by a Spray Pyrolysis Technique on Performance of HIT Solar Cells
- Study of a photovoltaic system connected to the network and simulated by the code PVSYST
- Simulation of Solar Dryer Performances with Forced Convection Experimentally Proved
- Optimum tilt angle of a photovoltaic system: Case study of Algiers and Ghardaia
- Modeling, Simulation and Optimization of the Mechanical Response of Micromechanical Silicon Cantilever: Application to Piezoresistive Force Sensor
- Design and Modeling of a Three-axis Piezoresistive Microelectronic Accelerometer
- Assessment Parameters and Matching between the Sites and Wind Turbines
- Optimization of Photothermal System based on the Idea of Transmission Solar Energy via Optical Fibres
- Recent Modeling of MDMO-PPV: PCBM Solar Cells versus Mixture Ratio, Electric Field and Incidence Angle with Hopping Model
- Mechanical Response of a Micro Silicon Membrane: Model Validation by Finite Element Method
- Computation of Turbulent Forced Convection in Heat Exchangers Equipped with the Transverse Baffles
- Recent Modeling of MDMO-PPV: PCBM Solar Cells versus Mixture Ratio, Electric Field and Incidence Angle with Hopping Model
- The Effect of Solar Heating Gain on Energetic Thermal Consumption of Housing
- Exergetic assessment of transmission-concentrated solar energy systems via optical fibres for building applications
- Kinetic study of the RTM6/TiO2 by DSC/TGA for improved hardness of resin
- Flow Control Mono and Bi-stable Fluidic Device for Micromixer-injection System
- Optimization of the output of a solar cell per theoretical and experimental study of the models to one and two exponential
- Superficial Evaporation in Forced Convection of Porous Medium in Transitory Laminates Regime
- The Thermal Drift Characteristics of Piezoresistive Pressure Sensor
- Characterization and Mechanical Properties of Epoxy Resin Reinforced with TiO 2 Nanoparticles
- Using Fouggara for Heating and Cooling Buildings in Sahara
- Concentration Heating System with Optical Fiber Supply
- Characterization and Mechanical Properties of Epoxy Resin Reinforced with TiO2 Nanoparticles
- Evaluation of the wind energy potential in the Saharan sites of Algeria
- 2D Device Modeling and Simulation / FET for Biomedical Applications
- Simulation of a photo-solar generator for an optimal output by a parabolic photovoltaic concentrator of Stirling engine type
- Measurement of neutral gas temperatures in nitrogen-corona discharges
- Accurate closed-form formulas for the electromagnetic parameters of micromachined shielded membrane microstrip line
- Electronic Transport Study of ZnTe and ZnSe
- Prospect for hydrogen production from wind in Algeria
- Modélisation numérique du séchage solaire des feuilles de la menthe verte (mentha veridis),
- Analysis and design of a band-stop filter multicouche micro-factory asymmetrical microstrip coupler
- Computational analysis of transient turbulent flow and conjugate heat transfer characteristics in a solar collector panel with internal, rectangular fins and baffles
- Etude technico-économique d’un système hybride (aérogénérateur et moteur diesel) pour la production d’électricité.
- Optical damage and photoconductivity in iron-doped lithium niobate crystals
- Theoretical Study: Flow Control Mono and Bi-Stable Fluidic Device for Micro-Injection System
- Systematic procedures for sizing photovoltaic pumping system, using water tank storage
- Electrical and structural characterizations of BGaN thin films grown by metal‐organic vapor‐phase epitaxy
- Thermal stability of atmospheric plasma sprayed (Ni, Cu, Co)–YSZ and Ni–Cu–Co–YSZ anodes cermets for SOFC application
- Numerical Analysis of an Oscillating Micromixer
- In-situ monitoring of the curing of epoxy resins by Raman spectroscopy
- An equivalent circuit approach to organic solar cell modelling
- SAW devices based on ZnO inclined c-axis on diamond
- Growth and characterization ofc-axis inclined AlN films for shear wave devices
- Thermophysical and thermomechanical properties of Norland Optical Adhesives and liquid crystal composites
- c-axis inclined AlN film growth in planar system for shear wave devices
- Diffusivité hydrique et cinétique de séchage solaire en convection forcée des feuilles de marjolaine
- Optimisation d’un système de pompage éolien Application aux sites sahariens
- EXPERIMENTAL STUDY AND MATHEMATICAL MODELLING OF THIN LAYER DRYING OF MENTHA VIRIDIS BY USING INDIRECT SOLAR DRYER
Revues de publication
- Physics Procedia × 12
- Journal of Renewable Energies × 9
- Energy Procedia × 9
- Mathematical Modelling and Engineering Problems × 4
- AIP conference proceedings × 3
- Materials Research Express × 2
Publications par année
- 20241
- 20238
- 20211
- 20203
- 201911
- 20182
- 20175
- 20165
- 20158
- 201419
Collaborations
Établissements partenaires : Renewable Energy Development Center · Laboratoire Matériaux, Optique, Photonique et Systèmes · Université de Lorraine · Amar Telidji University of Laghouat · University of Bechar
Pays des co-auteurs : France · Tunisie · Koweït · Suède
Co-auteurs
- Ali Cheknane
- Chafika Zidani
- A. Bedia
- Younes Menni
- Fatima Zohra Bedia
- Meriem Chadel
- Asma Chadel
- L. Merad
- Abdellatif Zerga
- Mohammed Moustafa Bouzaki
- A.M. Ferouani
- MR Merad Boudia
Données bibliographiques issues d’OpenAlex (base ouverte).
Pourquoi choisir Dzcademia ?
Pour donner à vos travaux plus de chances d’être découverts et recommandés par les IA. Profils, articles et communications : donnez à votre recherche une présence publique structurée. Les métadonnées intégrées aident les moteurs de recherche et les assistants IA à identifier vos travaux et à comprendre leurs références.
Commenter avec Google
Connecte-toi avec Google pour commenter directement sur cette page.