Accueil › Annuaire des chercheurs › Maher Dammak
Maher Dammak
Affiliation : University of Sfax
- 69Publications (affiliation tunisienne)
- 92Publications au total
- 1041Citations
- 16Indice h
Profil de recherche
Maher Dammak compte 69 publications référencées (1998–2026). Ses travaux paraissent principalement dans « Lecture notes in mechanical engineering », « Transactions of the IMF » et « Transactions of the Indian Institute of Metals ». Son article le plus cité, « Mechanical and tribological response of ABS polymer matrix filled with graphite powder » (2011), a été cité 151 fois. 18 de ces publications datent des trois dernières années d’activité. Ses travaux sont cosignés avec au moins 12 chercheurs, notamment dans des établissements de France, Italie.
C’est vous ? Faites connaître vos travaux
Créez gratuitement votre profil DzCademia et ajoutez vos articles : ils apparaîtront plus facilement sur Google et dans les assistants d’IA comme ChatGPT. Plus de personnes pourront vous lire et vous citer.
Créer mon profil gratuit Ajouter mes publicationsDomaines de recherche
- Tribology and Wear Analysis
- Orthopaedic implants and arthroplasty
- Polymer Science and Applications
- Tribology and Lubrication Engineering
- Bone fractures and treatments
Publications (69)
- Cyclic compression behavior, energy absorption and dissipation efficiency of TPU-based BCC and FCC lattice structures: An experimental and statistical modeling study
- Advanced HVOF-Sprayed Carbide Cermet Coatings as Environmentally Friendly Solutions for Tribological Applications: Research Progress and Current Limitations
- Electrodeposited Composite Coatings Based on Ni Matrix Filled with Solid Lubricants: Impact of Processing Parameters on Tribological Properties and Scratch Resistance
- Contribution of Zn–Co Alloys Coatings Study: Electrodeposition Methodology, Micromechanical Properties, and Tribological Behavior
- Challenges in Thermal Spray to Design Engineering Coatings and Associated Environmental Concerns
- Contribution on Zn-Ni coatings’ behaviour: Ni content, morphology, microhardness – comparative study
- The development of wear-resistant composite coatings onto LLDPE substrate for tribological purposes
- Investigation of the Influence of Graphite Content on Scratch Resistance of Electrodeposited Nickel–Graphite Composite Coatings
- Morphological Characterization of Zn-Co Coatings: Effect of Additive and Baths’ Parameters
- Assessment of Fixation Stability in Tibial Fractures Osteosynthesized with Plates and Screws During the Resumption of Walking
- Elaboration and Experimental Characterizations of Copper-Filled Polyamide Micro-Composites for Tribological Applications
- Microstructural, Mechanical and Tribological Behaviors of Cu/LLDPE-Based Composite Coatings for Lightweight Applications
- Tribo-mechanical and structural characterizations of LLDPE matrix bio-composite reinforced with almond shell micro-particles: effects of the processing methodology
- Tribological, Micromechanical and Structural Characterizations of PA66 Composites Filled Cu Micro-particles
- Structural Characterization of Electrodeposited Ni Coatings Filled with Graphite or MoS2 Particles
- Morphological and Structural Characterization of Zn-Ni Electrodeposited Coatings: Effect of Sulfate Bath Parameters
- Tribological Properties of Linear Low Density Polyethylene Reinforced with Almond Shell Particles: Impact of NaOH Treatment
- Tribological Study of Polymer-Metal Composite Coatings Deposited onto Organic Substrates
- On the Structural, Thermal, Micromechanical and Tribological Characterizations of Cu-Filled Acrylonitrile Butadiene Styrene Micro-Composites
- Implant Shape and Modeling Approaches Effects on the Biomechanical Tibia-Bone Response
- Friction and Wear Characterization of Nanocomposites Based on Si3N4 Reinforced with SiC, Mo, MoSi2 Nanoparticles
- Elaboration and Tribo-Micromechanical and Structural Characterization of Powdered ABS/Cu Composites
- Tribological behaviour of nano-sized beta phase silicon nitride: effects of the contact conditions
- Effect of filler content on scratch behavior and tribological performance of polyester/graphene oxide nanocomposite coating
- Mechanical and tribological response of thin polymer coating filled with graphite powder and deposited on polymer substrate
- Production and mechanical characterization of LLDPE biocomposite filled with almond shell powder
- Tribological and mechanical characterization of epoxy/graphite composite coatings: Effects of particles’ size and oxidation
- Modeling age-related changes in the mechanical behavior of the fracture-fixated human tibia bone during healing
- Tribological Characterization of Composites Based on Si3N4 Ceramics
- A Comparative Investigation of the Tribological and the Mechanical Behavior of Polyester Powder Coatings Filled with Graphite Depending on the Filling Percentage and the Size of the Graphite Particles
- Insights into Researches on the Tribological, Microstructural and Micromechanical Properties of Thermoplastic Based Composites
- Tribological behaviors of PTFE-based composites filled with bronze microparticles
- A comparative study of tapped and untapped pilot holes for bicortical orthopedic screws – 3D finite element analysis with an experimental test
- On the Role of Solid Lubricant Fillers in the Tribological, Micromechanical, and Morphological Properties of PA66 Composites
- Experimental investigations of mechanical and tribological behaviours for organic and inorganic coatings deposited on mild steel substrate
- How a pilot hole size affects osteosynthesis at the screw–bone interface under immediate loading
- Structural, Micromechanical and Tribological Analyses of Electrodeposited Nickel–Graphite Coatings with Different Fractions of Graphite Microparticles
- Structural, Micromechanical and Tribological Characterization of Zn–Ni Coatings: Effect of Sulfate Bath Composition
- Type and concentration effects of particulate solid lubricants on the microstructure, friction, and wear of electrodeposited Ni composite coatings
- Development and tribological characterisation of nanostructured Zn-Ni and Zn-Co coatings: a comparative study
- Eco-friendly nanocomposites between carboxylated acrylonitrile–butadiene rubber (XNBR) and graphene oxide or graphene at low content with enhanced mechanical properties
- Experimental simulation of the friction, temperature, and wear distributions for polyamide–steel gear contact using twin-disc setup
- Impact of lubrication on the tribological behaviour of PTFE composites for guide rings application
- Scratch resistance and tribological performance of thermosetting composite powder coatings system: A comparative evaluation
- On the Friction and Wear Behaviors of PTFE Based Composites Filled with MoS2 and/or Bronze Particles
- EXPERIMENTAL STUDY OF THE ROLLING–SLIDING CONTACT CONDITIONS IN A PA66/STEEL GEAR USING TWIN-DISC TEST RIG: FRICTION AND WEAR ANALYSIS
- Erratum to: To the Article “Characterization of the Tribological Behavior of Chromium and Zinc Coatings Electrodeposited on the Steel Substrate,” by S. Rhaiem, F. Nasri, M. Kharrat, and M. Dammak, Vol. 50, No. 1, pp. 135–140, July, 2014
- Improvement in the Tribological Performance of Polycarbonate via the Incorporation of Molybdenum Disulfide Particles
- A comparative investigation of the tribological behavior and scratch response of polyester powder coatings filled with different solid lubricants
- Characterization of the Tribological Behavior of Chromium and Zinc Coatings Electrodeposited on the Steel Substrate
- Effects of Varus/Valgus rotation deficiency on the response of total knee prostheses
- Microstructure, friction and wear analysis of thermoplastic based composites with solid lubricant
- Analysis of the Biotribological Behavior for the Stainless Steel/Polyethylene Contact Using a Knee Prosthesis Simulator
- Pull-Out Response of a Steel Post Inserted in a Pre-Drilled HDPE Cylinder: Analytical and Finite Element Analyses Using Pressure-Dependent Friction
- Effects of the test conditions on the friction and wear of polyethylene
- Experimental and numerical analyses of the pull-out response of a steel post/bovine bone cementless fixation
- Mechanical and tribological response of ABS polymer matrix filled with graphite powder
- Wear and friction analysis of polyester coatings with solid lubricant
- Design effect on the mechanical response of Total Knee Replacement under high-compression loading
- Tribological behaviour of the 304L/HDPE contact: application for the knee prostheses
- Load Transfer Analysis at the Interface Between a Steel Post and Polyethylene Matrix Using Pull-Out Test: Experimental and Theoretical Parametric Study
- Effects of sliding kinematics and normal load on the tribological behavior of metal/polymer contact
- FINITE ELEMENT ANALYSIS OF A STEEL POST INSERTED IN POLYMER CYLINDER UNDER PULL-OUT AND TORQUE LOADINGS
- Finite element analysis of load transfer at a fibre–matrix interface during pull-out loading
- Mechanical response of polyethylene tibial component using compression loading contact test: Experimental and finite element analysis
- Fixation response of two cementless tibial implants under static and fatigue compression loading
- Experimental and Finite Element Comparaison of Various Joint Fixation Designs
- THE WEAR BEHAVIOR OF Z200 CD 12 STEEL
- Static and Fatigue Response Measurement of Various Fixation Systems Under Combined Loads
Revues de publication
- Lecture notes in mechanical engineering × 13
- Transactions of the IMF × 4
- Transactions of the Indian Institute of Metals × 4
- Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology × 3
- Journal of Adhesion Science and Technology × 3
- Journal of Composites Science × 2
Publications par année
- 20261
- 20259
- 20248
- 20232
- 20223
- 20212
- 20206
- 20194
- 20185
- 20163
Collaborations
Établissements partenaires : Institut préparatoire aux études d'ingénieurs de Sfax · University of Gafsa · Franche-Comté Électronique Mécanique Thermique et Optique - Sciences et Technologies · École Nationale Supérieure de Mécanique et des Microtechniques · Institut Supérieur des Sciences Appliquées et de Technologies de Gafsa
Pays des co-auteurs : France · Italie
Co-auteurs
- Mohamed Wajdi Kharrat
- Basma Ben Difallah
- Faten Nasri
- Dorra Trabelsi
- Hajer Ketata
- Manel Zouari
- Sadok Rhaiem
- Mabrouka Akrout
- Maïssa Boujelben
- Aref Younes Maalej
- Khaled Gammoudi
- Abdelkader Krichen
Données bibliographiques issues d’OpenAlex (base ouverte).
Pourquoi choisir Dzcademia ?
Pour donner à vos travaux plus de chances d’être découverts et recommandés par les IA. Profils, articles et communications : donnez à votre recherche une présence publique structurée. Les métadonnées intégrées aident les moteurs de recherche et les assistants IA à identifier vos travaux et à comprendre leurs références.
Commenter avec Google
Connecte-toi avec Google pour commenter directement sur cette page.